ECOSTAR 2K (A+B)
ECOSTAR 2K is a two-component water-based polyurethane lacquer for wooden floors, characterized by high solid content, easy to apply, high pore wettability even on brushed woods giving a warm and pleasant shade to the floor treated. ECOSTAR 2K has high abrasion and sole marks resistances allowing its use for high traffic surfaces. CERTIFICATIONS: SURFACE RESISTANCE TO COLD LIQUIDS EN 12720 AND CHEMICALS AGENTS EN 13442. Determination of the Coefficient of Friction of floors- B.C.R.A Method (cycle ECOPRIME HS 120 + ECOSTAR 2K)
¤Characteristics :
Mixture ratio 10/1
Application temperature +10°C ÷ +25°C
Application 8 mm microfiber roller / brush
Thinning (if necessary) DILUENTE DR H20
Coverage 80 - 100 g/m² (100 g/m² for
ECOSTAR 2K LD)
Dust dry 30' (1)
Fingerprint dry 2 h (1)
Pot-Life 2 h (1)
Sanding 24 h (1)
Overcoating without sanding 4 - 12 h (1)
Gloss level LD: 80 gloss (*see note for
ECOSTAR 2K LD), SL: 40 gloss, OP:
20 gloss, SUPER OP: 8 gloss (2)
Chemical and physical
characteristics
excellent
Coating excellent
Wood oxidation light
Storage stability 1 year (3)
Packaging 5,5 L (5+0,5)
Tool cleaning DILUENTE DNH 40 (with fresh
product)
ECOSTAR 2K, catalysed according to the indicated ratio and mixed thoroughly, has to be applied to filled, sanded and vacuumed wooden floors.
When working conditions are critical (hot temperatures, low humidity or large areas), it is advisable to add 5-10% of retardant DILUENTE DR H20 (see technical data sheet). Apply the finish evenly with a smooth flowing action avoiding accumulations and any risk of overlapping. A second coat of ECOSTAR 2K can be applied after 4 hours without sanding or after 24 hours with a previous light sanding using a 220/320 paper grit. During theapplication it is very important to apply the varnish along the wood grain. A third coat of ECOSTAR 2K can be applied, following the
previously mentioned guidelines. In order to achieve better results and higher softness to the touch, it is advisable to sand after each coat.
Very good results can be achieved by applying a first coat of ECOPRIME HS 120 (see technical data sheet), sanding and applying one or two coats of ECOSTAR 2K. For a more intense coloration of the wood it is advisable to use as first coat ECOCROM (see technical data sheet). In case of application of ECOSTAR 2K directly on wood with tannin content is advisable to make a preliminary test. The maintenance of wooden floors treated with ECOSTAR 2K has to be done with VELUREX range of products (see technical data sheets).
INR 0 INR 0
Availability:True
Pay mode:COD only
