Innovact Wood Flooring Inspired by nature and designed for living, you’ll find our floors are beautifully realistic and highly practical. By offering a wide and impre sive range of designs, finishes and formats, you can create a natural wood floor that’s unique to your home and guaranteed to last for years to come. Safeguarding quality, we combine expertise with the possibilities offffered by technology. Each production stage – beginning with selection of wood, and ending with creation of end product – is accompanied by a precise system of quality control by specialist. From the hallway to the bathroom and right through your home, Innovact WoodFloors can provide you with the perfect floors for your space, your needs and your style.

ECOSTAR is a single-component water-based lacquer for wooden floor characterized by high solid content, high resistance to wear and a pleasant final appearance. ECOSTAR gives to the wood a warm and slightly oxidized look. ¤Characteristics : Mixture ratio single-component Application temperature +10°C ÷ +25°C Application 8 mm microfiber roller / brush Thinning (if necessary) DILUENTE DRH2O Coverage 80-100 g/m² Dust dry 40' (1) Fingerprint dry 2 h (1) Sanding 12 -24 h (1) Overcoating without sanding 2-4 h (1) Gloss level LD: 60 gloss; SL: 40 gloss; OP: 20 gloss; SUPER OP: 13 gloss (2) Chemical and physical characteristics good Coating excellent Wood oxidation light Storage stability LD, SL, OP: 1 year (3) Storage stability SUPER OP: 6 months (3) Packaging 5 L Tool cleaning DILUENTE DNH 40 (with fresh product) ¤How to use : ECOSTAR is a ready-to-use lacquer, which is applied to filled, sanded and vacuumed wooden floors. A second coat of ECOSTAR can be applied after 2/4 hours (in this case without sanding) or after 12 -24 hours (in this case sand with 220 paper grit). A third coat of ECOSTAR can be applied following the guidelines mentioned above. In order to achieve better results and higher softness to the touch, it is advisable to sand after each coat. In the cycles consisting of primer and finish it is absolutely not-recommended to use two-component solvent-based primer (combined cycles), but it's recommended to use singlecomponent water-based primer as ECOCROM or ECORAPID (see technical datasheets) and then ECOSTAR as a finish. The application of ECOSTAR directly on wood containing tannin should be preceded by a prior test.