Description :
SIGOL is an odorless free of solvents and water two-component epoxy-polyurethane adhesive.¤ Destinations: suitable to lay all kinds of wood in any size including solid and engineered floors, without requiring the pre-laying of wood joists and, with previous suitable treatment, onto not absorbing preexisting subfloors (ceramics, tiles, marble, palladian, gres, etc). Also suitable for gluing onto heated subfloors.
¤Characteristics :
Mixture ratio 9/1
Application temperature +10°C ÷ +25°C
Application notched trowel n. 5
Pot-Life 2 h (1)
Hardening 36/48 h (1)
Coverage 1300-1900 g/m² depending on the
subfloor.
Colour oak, walnut
Storage stability 1 year (2)
Packaging 10 Kg (9+1) - 5 Kg (4,5+0,5)
Tool cleaning DILUENTE DS (before the
hardening of the adhesive)
¤How to use :
After mixing the two components, spread SIGOL with a notched trowel uniformly on a clean subfloor embodying possible dust present on it. Proceed with the laying ensuring that the wood tiles are put together properly and gently hammered so as to make the adhesive adhere well to the whole surface. Perfect adhesion to the subflooris ensured if at least 65% of each wooden component is in direct contact with the adhesive.
In presence of dust-creating and porous subfloors, we recommend to apply first one coat of PRYMER A, PRYMER PUB 77, PRYMER SF 1105, PRYMER FAST 500 or PRYMER 100 (see technical data sheets).
After the complete drying of the treatment proceed with the application of the adhesive. In presence of humid subfloors, we recommend to apply first PRYMER PUB 77, PRYMER SF 1105, PRYMER FAST 500, PRYMER 100, PRYMER EPOX WETT or PRYMER WB 328 S (see technical data sheets). We do not recommend to dip the heads of the tiles into the SIGOL while laying them. If need be, dip the heads of the tiles into a vynilic (PARKETTKOLL) adhesive which has a very strong wood to wood adhesion avoiding also the typical "skidding" of the tiles. If the parquet is to be laid on glassy surfaces (ceramic tiles, enamelled tiles, polished marble, etc.), remove and clean the surface from dust, grit, glue and waxes. Apply by cloth the adhesion promoter DILUENTE APA (see technical data sheet) following the correct application time, than apply SIGOL. In case of anhydrite subfloors, thoroughly sand using 24 or 36 grit sandpaper; remove dust and apply primer using PRYMER SF 1105 (do not dilute) or PRYMER PUB 77 with DILUENTE DMC 50 thinner at a ratio 70:30. Apply SIGOL and the next sanding should take place after 3-4 days, depending on the atmospheric conditions and humidity level of the wood species used. When laying down pre-lacquered wooden floors, if a wood piece gets accidentally dirty with glue, clean immediately with DILUENTE PULIPAR or PULIPAR W (see technical data sheets). We recommend, while using SIGOL, to use all the personal prevention systems.
