Description :
PRYMAREN is an insulating single-component acrylic water-based primer with not-yellowing resins suitable for the application of ECOSTAR 2K HD per Pavimenti in resina (10-2) range of products. Its special formulation improves the adhesion of waterbased lacquer on microcements and mineral support increasing the resistance to water and to alkaline surfaces. The notyellowing and high curing properties recommend the application of PRYMAREN onto light or dark microcement.
¤Characteristics :
Mixture ratio single-component
Application temperature +10°C ÷ +25°C
Application 8 mm microfiber roller / brush
Thinning (if necessary) 10-20% water
Coverage 70-80 g/m²
Overcoating without sanding 2-3 h (1)
Total drying time 12-24 h (1)
Pot-Life n.a.
Storage stability 1 year (2)
Packaging 5 Kg
Tool cleaning water (with fresh product)
1 at 20°C and 65% R.H.
2 in original sealed containers at temperatures between +10°C and +25°C
¤How to use :
The surface must be perfectly hardened, structurally sound, dry, clean and free of grease and waxes.In the case of old or previously treated floors, clean thoroughly the surface with VELUREX Dewachs (see technical data sheet). It is advisable to plan the work in order to apply each coat of the products in maximum 8 hours time. High absorbent microcements. Apply PRYMAREN dilute with 20% of water, after about 2 hours
and complete dryness, apply a second coat of product without dilution. Proceed with the subsequent application of ECOSTAR 2K HD per
Pavimenti in resina (10-2) (see technical data sheet) after 2-3 hours within 8 hours from the last application. Low absorbent microcements.
Apply one coat of PRYMAREN dilute with 10% of water. After 2-3 hours within 8 hours proceed with the subsequent application of ECOSTAR 2K HD per Pavimenti in resina (10-2) (see technical data sheet). Adhesion promoter. It is possible to apply PRYMAREN between to coats of
microcements.
