Innovact Wood Flooring Inspired by nature and designed for living, you’ll find our floors are beautifully realistic and highly practical. By offering a wide and impre sive range of designs, finishes and formats, you can create a natural wood floor that’s unique to your home and guaranteed to last for years to come. Safeguarding quality, we combine expertise with the possibilities offffered by technology. Each production stage – beginning with selection of wood, and ending with creation of end product – is accompanied by a precise system of quality control by specialist. From the hallway to the bathroom and right through your home, Innovact WoodFloors can provide you with the perfect floors for your space, your needs and your style.

PRYMER FAST 500 is a single-component polyurethane primer with very low emissions of volatile organic compounds. PRYMER FAST 500 is recommended as anti-dust, superficial consolidate treatment and Damp Proof Membrane (DPM) on cement subfloors. PRYMER FAST 500 is recommended as anti-dust treatment on anhydrite and heated-subfloors. CERTIFIED EC1. PRYMER FAST 500 can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, because it meets the certification LEED protocol (Leadership in Energy and Environmental Design). ¤Characteristics : Mixture ratio single-component (ready to use) Application temperature +10°C ÷ +25°C Application roller 6/8 mm / brush Thinning (if necessary) DILUENTE DMC 50 Coverage 120 - 450 g/m² depending on the subfloor and use. Hardening 45' - 50' (1) Specific weight 1,10 Kg/l Storage stability 9 months (2) Packaging 6 Kg - 12 Kg Tool cleaning DILUENTE DNE 1 at 20°C and 50% R.H. 2 in original sealed containers at temperatures between +10°C and +25°C ¤How to use : Restoration of very poor or dusty subfloors Clean the subfloor to be treated by eliminating totally any trace of oil, grease, wax, or paint spots. The subfloor must be free from cracks. Apply one coat of PRYMER FAST 500 with an 6/8 mm roller or a 3x13cm or 4x14cm flat brush in a quantity of approximately 120-150 g/m² in a regular, uniform way, creating a thin film and avoiding any pooling that could compromise the drying time and the hardening of reactive resins adhesives. The following bonding must be performed after 45-50 minutes and within 24 hours using only reactive adhesives, such as UNISIL, ADESIVER ELASTIC, ADESIVER 327 PU, ADESIVER HERCULES, ADESIVER 501 EP, SIGOL (see relative technical data sheets). Prior to the application of leveling compounds or in case the bonding is performed after 24 hours from the last coat, scatter the whole surface with QUARZO (0.8 mm ÷ 1.2 mm) on primer still wet. After complete curing, vacuum to remove any loose quartz. When the bonding is done after 24 hours and no quartz has been used, sand the surface with mono-disc machine using 36-40 grit sanding paper. Do not pour left over product back into the original package.