Innovact Wood Flooring Inspired by nature and designed for living, you’ll find our floors are beautifully realistic and highly practical. By offering a wide and impre sive range of designs, finishes and formats, you can create a natural wood floor that’s unique to your home and guaranteed to last for years to come. Safeguarding quality, we combine expertise with the possibilities offffered by technology. Each production stage – beginning with selection of wood, and ending with creation of end product – is accompanied by a precise system of quality control by specialist. From the hallway to the bathroom and right through your home, Innovact WoodFloors can provide you with the perfect floors for your space, your needs and your style.

ECOSTAR 2K is a two-component water-based polyurethane lacquer for wooden floors, characterized by high solid content, easy to apply, high pore wettability even on brushed woods giving a warm and pleasant shade to the floor treated. ECOSTAR 2K has high abrasion and sole marks resistances allowing its use for high traffic surfaces. CERTIFICATIONS: SURFACE RESISTANCE TO COLD LIQUIDS EN 12720 AND CHEMICALS AGENTS EN 13442. Determination of the Coefficient of Friction of floors- B.C.R.A Method (cycle ECOPRIME HS 120 + ECOSTAR 2K). ¤Characteristics : Mixture ratio 10/1 Application temperature +10°C ÷ +25°C Application 8 mm microfiber roller / brush Thinning (if necessary) DILUENTE DR H20 Coverage 80 - 100 g/m² (100 g/m² for ECOSTAR 2K LD) Dust dry 30' (1) Fingerprint dry 2 h (1) Pot-Life 2 h (1) Sanding 24 h (1) Overcoating without sanding 4 - 12 h (1) Gloss level LD: 80 gloss (*see note for ECOSTAR 2K LD), SL: 40 gloss, OP: 20 gloss, SUPER OP: 8 gloss (2) Chemical and physical characteristics excellent Coating excellent Wood oxidation light Storage stability 1 year (3) Packaging 5,5 L (5+0,5) Tool cleaning DILUENTE DNH 40 (with fresh product) ¤How to use: ECOSTAR 2K, catalysed according to the indicated ratio and mixed thoroughly, has to be applied to filled, sanded and vacuumed wooden floors. When working conditions are critical (hot temperatures, low humidity or large areas), it is advisable to add 5-10% of retardant DILUENTE DR H20 (see technical data sheet). Apply the finish evenly with a smooth flowing action avoiding accumulations and any risk of overlapping. A second coat of ECOSTAR 2K can be applied after 4 hours without sanding or after 24 hours with a previous light sanding using a 220/320 paper grit. During the application it is very important to apply the varnish along the wood grain. A third coat of ECOSTAR 2K can be applied, following the previously mentioned guidelines. In order to achieve better results and higher softness to the touch, it is advisable to sand after each coat. Very good results can be achieved by applying a first coat of ECOPRIME HS 120 (see technical data sheet), sanding and applying one or two coats of ECOSTAR 2K. For a more intense coloration of the wood it is advisable to use as first coat ECOCROM (see technical data sheet). In case of application of ECOSTAR 2K directly on wood with tannin content is advisable to make a preliminary test. The maintenance of wooden floors treated with ECOSTAR 2K has to be done with VELUREX range of products (see technical data sheets).