Updates
Products
Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.
Single-component vinyl adhesive in water dispersion with low water content PARKETTKOLL LISTONI is a single-component vinyl adhesive formulated with resins in water dispersion for laying of high thickness solid wooden floors. In many situations PARKETTKOLL LISTONI can take the place of a two-component adhesive. This adhesive is classified as "HARD-ELASTIC" according to ISO 17178. Its special feature is the very low content of water, which makes it ideal for firm sticking, without the usual defect of lateral "push". Moreover the plastification of the polymers present in formulation is very carefully looked after, so as to guarantee to the glue's film a lasting "intrinsic elasticity".
Single-component vinyl adhesive in water dispersion PARKETTKOLL TOP RU is a single-component synthetic resinbased vinyl adhesive in water dispersion treated with polyvinyl alcohol-based protective colloids and having an average particle diameter of 0.5÷3 microns. These particularresins characteristics, together with special coalescents, give PARKETTKOLL TOP RU a special "affinity with wood" helping the adhesive to penetrate the wood fibres and so creating an adhesive strength which is higher than usual (even on particularly hard and close grained woods). This adhesive is classified as "HARD" according to ISO 17178.¤ Destinations: PARKETTKOLL TOP RU has been tried and tested with great success in the laying of wooden flooring such as lamparquet, wood strips of 14mm. and wood strips of 17mm. The rapidity of curing stops the ends from "lifting" but, at the same time, it means that it cannot be spread extensively on the subfloor (the light film on the surface of the spread adhesive forms more quickly than with traditional adhesives for parquet).
Single-component adhesive with a silanic termination (MS technology) ADESIVER ELASTIC is a single-component hydro-curing prepolymer based adhesive with a silanic termination (MS technology). Recommended for gluing of pre-finished wooden floor onto marble, grit, ceramic or marble-chip floor tiles, etc. Also suitable for gluing wooden floor onto underfloor heating and cooling system. ADESIVER ELASTIC has very good acoustic insulation characteristics. CERTIFICATES: EC1 PLUS, heat conductivity (CSI test report n° 0013/DC/TTS/19). ADESIVER ELASTIC can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, because it meets the certification LEED protocol (Leadership in Energy and Environmental Design).
single-component water-based solvent-free joint filler for wooden floors ECOFILL TECH is a solvent-free single-component water-based acrylic filler which, mixed with the dust produced by sanding is used to smooth the wooden floor. ECOFILL TECH, thanks to its high viscosity, has excellent filling power allowing a quick sanding of the floor without shrinkings. CERTIFICATES: EC1 PLUS. ECOFILL TECH can contribute to the achievement of QI CREDIT 4.1 according to the parameters of the GEV dated 03 March 2009, because it meets the certification LEED protocol (Leadership in Energy and Environmental Design).
Water-repellent silicone impregnator for outdoor and indoor stone and absorbent materials SIL CARis a compound specially formulated with nanoparticles for the treatment of absorbent materials (indoor and outdoor). The treatment gives a water-repellent effect only a few hours after the application. This is due to the nanotechnology particles of the product that allow it to penetrate up to depth very well. SIL CAR has been used for years with excellent results in construction for colourless, invisible and non-sticky filling treatments of building materials (such as: fresh concrete, plaster, asbestos cement, porous concrete, etc). It's efficient for materials such as bricks, natural and artificial stones, natural pigment paints. Surfaces treated with SIL CAR appear slightly toned, non-sticky, permeable to water vapor and to alkaline effect of quicklime. Although it doesn't contain antimicrobial/anti-mold additives, insulating the support delays mold formation.
Top coats chemical for wooden flooring ECOSTAR 2K SPORT (A+B) ECOSTAR 2K SPORT is a two-component water-based polyurethane lacquer for sportive wooden floors. ECOSTAR 2K SPORT has same technical characteristics of our standard ECOSTAR 2K; it has been formulated in order to meet the highest anti slip standard requirements for sport wooden floors. ECOSTAR 2K SPORT is in conformity with European standards for sportive wooden floors meeting EN14904 standard's requirements, DIN 18032-2 for slip resistance and it's classified as EN 13501-1. Hardness, distension, chemical and mechanical resistances put ECOSTAR 2K SPORT on top of range's quality. It is recommended and certified by the International Basketball Federation (FIBA Approved Equipment)
Water-based impregnator for outdoor wood LIOS SUNDECK W OIL LIOS Sundeck W Oil is a water-based impregnating oil for wood. It's particularly suitable for the treatment of wooden floors located outside as swimming pool edges, verandas, walkways, window and door frames, fences and canopies made of wood. LIOS Sundeck W Oil is composed of emulsified oils and water-based resins, reactive elements that bind to the wood lignin, strengthening it and delaying the wood decay (graying) significantly. The light mordant, in addition to be an excellent solar filter, gives to the wood a pleasant warm colour. On rubber and expansion joints the drying time could be longer.
stone materials for indoor and outdoor use. ACRIL CAR Description : Name of product/article ACRIL CAR ACRIL CAR is a solvent-based impregnator created in order to consolidate concrete surfaces, cement agglomerates, porphyry stones, brick-beamed, etc. ACRIL CAR is formulated with water resistant pure acrylic resins. For this reason the product is suitable in alkaline ambients (e.g. cement) and resistant to UV sunlight. Although it doesn't contain antimicrobial/anti-mold additives, insulating the support delays mold formation.
stone materials for indoor and outdoor use. SCUDO INVISIBILE is a specially formulated compound with nanotech particles for the treatment of absorbent materials (indoor and outdoor). The treatment gives an water-oil-repellent effect already in some hours after application. This is possible thanks to the nanotech particles of the product that allow it to deep into very well. SCUDO INVISIBILE is used for transparent impregnation; it is invisible and non sticky and can be used on fresh concrete, plaster, asbestos cement, aerated concrete etc... It is also efficient for materials such as bricks, natural and synthetic stones, paints based on natural pigments. The surfaces treated with SCUDO INVISIBILE are slightly toned, not sticky, permeable to water vapor and stable to alkali lime effects. Doesn't degrade rubbers and expansion joints. It is recommended anyway to carryout some tests before.
wooden flooring by company bangalore Innovact Wooden Flooring represents a homogeneous construction of wood. The product expands 30% more than engineered wood and therefore it is seasoned well to allow for such expansion. Innovact Wooden Flooring comes with seven coats of formaldehyde-free acrylic lacquer which is uv-cured so that the product does not get dusty. Having unique features such as stain and scratch resistance, Innovact wooden flooring floors provides natural warmth. Easy to maintain and clean, this type of flooring comes with feather touch that provides comfort of bare foot walking.